
Out Of The Blue Mini Inflatable Doll 66 cm
13,75 €

Out Of The Blue Mini Inflatable Doll 66 cm
A compact 66 cm inflatable doll from Out Of The Blue designed as a novelty party prop. Lightweight and portable, it’s made of PVC, has two holes and an inflation valve — aimed at hens, stags and gag gifts rather than sexual use. Choose this when you want a small, unmistakable prop to carry and set up quickly at events.
Secure Payment
Easy Returns
Discreet Shipping
Description
This is a mini inflatable doll from Out Of The Blue built as a novelty prop for parties and practical jokes. At 66 cm tall it’s a portable, easy-to-handle item with an inflation valve on the back, two cut‑outs (one at the front intimate area and one at the rear), protruding chest detail and a drawn face. It’s manufactured in PVC and sold in three designs — two in a vanilla tone with pink intimate areas and one in dark brown with pink intimate area. Important: it is not intended for sexual use and is marketed for pranks and themed parties.
Ficha técnica
| Material | PVC |
|---|---|
| Height | 66 cm (portable size) |
| Designs | Three designs: two vanilla with pink intimate area, one dark brown with pink intimate area |
| Intended use | Novelty / party prop (not intended for sexual use) |
How to use
Inflate using a standard hand pump or by mouth via the valve on the back; inflate gradually and avoid over‑inflation — PVC stretches and can burst if pushed too far. This product is a gag item for parties: set it up as a prop or photo piece, not as a sex toy. If the doll will be handled a lot during an event, check seams and avoid sharp objects or abrasive surfaces.
Because it’s made from PVC, avoid contact with oil‑based or petroleum products which can weaken or stain the material. If you plan to use any personal products near the doll, stick to mild, water‑based products — and again, do not use the item for sexual contact.
Cleaning and care
Wipe down after use with warm water and a mild soap or a gentle, non‑abrasive toy cleaner suitable for PVC. Rinse and dry thoroughly before packing away. Keep away from direct heat, open flames and prolonged sunlight which can warp or discolour PVC. Small punctures can sometimes be patched with a vinyl repair kit — follow the kit instructions and test on a small area first. Dispose of responsibly if the item is irreparably damaged; PVC is not biodegradable.
Who it’s for: anyone looking for a compact, unmistakable party prop you can carry and inflate on site — great for stag/hen dos, joke gifts and themed events. Who it’s not for: anyone seeking a product for intimate or sexual use, or those after a durable heavy‑duty prop for repeated professional performances.
For someone wanting a compact novelty inflatable doll for parties and pranks.
Frequently Asked Questions
Can I inflate it with a pump?
Yes — use a standard hand pump or small electric pump on a low setting. Inflate slowly and stop when the form is firm but not tight; over‑inflation risks splitting the PVC seams.
Is this safe to use at an outdoor party?
You can use it outdoors, but avoid sharp surfaces, barbed wire or heated surfaces that could puncture or melt the PVC. Keep it out of direct sun for long periods to prevent fading and weakening.
What if it gets a puncture?
Minor punctures can often be repaired with a vinyl or inflatable repair kit available from DIY stores. For larger tears, replacement is safer — PVC repairs can be temporary and won’t restore original strength.
Can I use this as a sex toy?
No. The manufacturer specifies this doll is intended for jokes and parties, not sexual use. Using it that way carries hygiene and safety risks and may damage the product.
Questions & Answers
No questions yet. Be the first to ask!
Ask a Question About This Product
No questions yet
Be the first to ask a question about this product!





